Flower Frame embroidery design

Flower Frame embroidery design

 

This design comes with 21 sizes:

1.3.01” X 2.98”(76.4mm X 74.6mm) 6278 st

2.3.24” X 3.21” (82.9mm X 81.5mm) 6799 st

3.3.49” X 3.45” ( 88.6mm X 877.7mm) 7345 st

4.3.74” X 3.70” (95.0mm X 64.1mm) 7882 st

5.3.98” X 3.94” (101.0mm X 100.2mm) 8436 st

6.4.24” X 4.20” (107.6mm X 106.8mm) 8993 st

7.4.49” X 4.44” (114.0mm X 112.9mm) 9494 st

8.4.74” X 4.69” (120.4mm X 119.4mm) 10037 st

9.4.98” X 4.94” (126.4mm X 125.4mm) 10516 st

10.5.24” X 5.20” (133.0mm X 132.0mm) 10970 st

11.5.49” X 5.44” (139.4mm X 138.2mm) 11567 st

12.5.74” X 5.69” (145.8mm 144.6mm) 12131 st

13.5.98” X 5.93” (151.8mm X 150.6mm) 12543 st

14.6.24” X 6.19” (158.4mm X 157.2mm) 13166 st

15.6.49” X 6.43” (164.8mm X 163.3mm) 13721 st

16.6.74” X 6.69” (171.0mm X 169.8mm) 14356 st

17.6.98” X 6.92” (177.2mm X 175.8mm) 14964 st

18.7.24” X 7.18” (183.8mm X 182.3mm) 15606 st

19.7.49” X 7.42” (190.2mm X 188.5mm) 16275 st

20.7.73” X 7.67” (196.4mm X 194.9mm) 16990 st

21.7.98” X 7.91” (202.3mm ZX 201.0mm) 17661 st

The following 8 formats are included in the file you will receive:

* DST – (Tajima)

* EXP – (Melco)

* HUS – (Husqvarna,Viking)

* JEF – (Janome,Elna,Kenmore)

* PES – (Brother,Deco,Babylock)

* SEW – (Janome,Elna,Kenmore)

*VP3 – (Husqvarna,Viking)

*VIP

 

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.

**********************************************************************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only – not a finished item. **********************************************************************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.