Lips machine embroidery design

Lips mini embroidery design tiny Kiss embroidery filled lips embroidery design kissy lips design realistic lips embroidery design #182

This design comes with 9 sizes: (W*H)

1.31” x 1.04” 1738 st

1.61” x 1.28” 2243 st

1.94” x 1.53” 3064 st

2.27” x 1.79” 3884 st

2.60” x 2.03” 4752 st

2.92” x 2.28” 5810 st

3.24” x 2.53” 6941 st

3.57” x 2.78” 8023 st

3.90” x 3.03” 9266 st

The following 8 formats are included in the file you will receive:

* DST – (Tajima)

* EXP – (Melco)

* HUS – (Husqvarna,Viking)

* JEF – (Janome,Elna,Kenmore)

* PES – (Brother,Deco,Babylock)

* SEW – (Janome,Elna,Kenmore)

* VP3 – (Husqvarna,Viking)

* ХХX

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.

*************************************************************************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only – not a finished item. *************************************************************************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.