Banner in the Hoop
3.90” X 3.88” (9.90mm X 98.6mm) 6751 st
4.26” X 4.24” (108.2mm X 107.8mm) 7315 st
4.51” X 4.49” (114.6mm X 114.0mm) 7727 st
4.76” X 4.74” (121.0mm X 120.4mm) 8140 st
5.00” X 4.98” (127.0mm X 126.4mm) 8515 st
5.26” X 5.24” (133.6mm X 133.0mm) 8956 st
5.51” X 5.49” (140.0mm X 139.4mm) 9382 st
5.76” X 5.75” (146.4mm X 145.8mm) 9837 st
6.00” X 5.98” (152.4mm X 151.8mm) 10277 st
6.26” X 6.24” (159.0mm X 1158.4mm) 10657 st
6.50” X 6.47” (165.2mm X 164.4mm) 11057 st
6.76” X 6.72” (171.8mm X 170.8mm) 11518 st
6.99” X 6.95” (177.6mm X 176.6mm) 11893 st
7.25” X 7.21” (184.2mm X 183.2mm) 12263 st
7.50” X 7.46” (190.6mm X 189.4mm) 12690 st
7.76” X 7.71” (197.0mm X 195.8mm) 13102 st
7.91” X 7.89” (200.8mm X 199.6mm) 13347 st
8.26” X 8.21” (209.8mm X 208.6mm) 13920 st
8.50” X 8.45” (216.0mm X 214.6mm) 14322 st
8.76” X 8.71” (222.6mm X 221.2mm) 14818 st
8.99” X 8.93” (228.3mm X 226.8mm) 15134 st
9.26” X 9.20” (235.2mm X 233.7mm) 15624 st
9.50” X 9.43” (241.2mm X 239.6mm) 15939 st
9.76” X 9.69” (248.0mm X 246.2mm) 16443 st
9.99” X 9.92” (253.8mm X 252.0mm) 16767 st
The following 8 formats are included in the file you will receive:
* DST – (Tajima)
* EXP – (Melco)
* HUS – (Husqvarna,Viking)
* JEF – (Janome,Elna,Kenmore)
* PES – (Brother,Deco,Babylock)
* SEW – (Janome,Elna,Kenmore)
* VP3 – (Pfaff. Husqvarna,Viking)
* XXX – (Compucon, Singer)
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.
**************************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only – not a finished item. ******************************************************************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as Tshirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.
