Hamsa machine embroidery design

Hamsa embroidery design Hamsa hand embroidery Jewish embroidery Hamsa Palm Hand Of Fatima Hand Of God yoga embroidery Chamsa khamsa #312

This design comes with 29 sizes :

2.19″ x 2.98″ 56mm x 76mm 6871 st

2.38″ x 3.25″ 61mm x 83mm 7404st

2.56″ x 3.51″ 65mm x 90mm 7914 st

 2.74″ x 3.76″ 70mm x 96mm 8451 st

 2.91″ x 4.00″ 74mm x 102mm 8952st

 3.10″ x 4.24″ 79mm x 108mm 9515st

3.28″ x 4.50″ 84mm x 115mm 10120st

 3.46″ x 4.75″ 88mm x 121mm 10667st

 3.64″ x 4.98″ 93mm x 127mm 11217 st

3.83″ x 5.24″ 98mm x 134mm 11740 st

4.01″ x 5.50″ 102mm x 140mm 12407 st

4.19″ x 5.75″ 107mm x 146mm 12970st

 4.36″ x 5.98″ 111mm x 152mm 13572st

4.55″ x 6.24″ 116mm x 156mm 14095st

4.73″ x 6.51″ 121mm x 166mm 14694st

 4.91″ x 6.76″ 125mm x 172mm 15391 st

 5.09″ x 6.98″ 130mm x 178mm 15949st

 5.28″ x 7.24″ 134mm x 184mm 16611 st

 5.46″ x 7.50″ 139mm x 191mm 17359 st

5.65″ x 7.76″ 144mm x 198mm 18018 st

 5.82″ x 8.00″ 148mm x 204mm 18767 st

 6.01″ x 8.25″ 153mm x 210mm 19484st

 6.19″ x 8.50″ 158mm x 216mm 20246st

 6.37″ x 8.75″ 162mm x 223mm 21067 st

 6.54″ x 8.98″ 167mm x 229mm 21758 st

6.73″ x 9.26″ 171mm x 236mm 22702 st

 6.91″ x 9.50″ 176mm x 242mm 23584 st

7.09″ x 9.75″ 181mm x 248mm 24536st

 7.27″ x 9.98″ 185mm x 254mm 25385st

 The following 9 formats are included in the file you will receive:

* DST – (Tajima)

 * EXP – (Melco)

 * HUS – (Husqvarna,Viking)

 * JEF – (Janome,Elna,Kenmore)

 * PES – (Brother,Deco,Babylock)

 * SEW – (Janome,Elna,Kenmore)

 *VP3 – (Husqvarna,Viking)

 *VIP

* ХХХ

 

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out. ************************************************************************************* You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only – not a finished item. ************************************************************************************* For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.