Sea Turtle machine embroidery Design
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.
2.99 €~ 3.23 $
Sold: 0
Report AbuseSea Turtle machine embroidery Design Preppy Turtle embroidery Beach embroidery Sea Turtle Summer embroidery baby embroidery sea #66
This design comes with 25 sizes (width):
1.99” x 1.91” (50.6mm x 48.4mm) 3197st
2.24” x 2.14” (57.0mm x 54.4mm) 3511st
2.50” x 2.38” (63.4mm x 60.4mm) 3812st
2.75” x 2.61” (69.8mm x 66.4mm) 4052st
3.00” x 2.86” (76.2mm x 72.6mm) 4341st
3.24” x 3.09” (82.4mm x 78.6mm) 4575st
3.50” x 3.33” (88.8mm x 84.6mm) 4832st
3.75” x 3.57” (95.2mm x 90.6mm) 5066st
4.00” x 3.81” (101.6mm x 96.8mm) 5283st
4.24” x 4.05” (107.8mm x 102.8mm) 5534st
4.50” x 4.28” (114.2mm x 108.8mm) 5738st
4.75” x 4.52” (120.6mm x 114.8mm) 5967st
5.00” x 4.76” (127.0mm x 121.0mm) 6154st
5.24” x 5.00” (133.2mm x 127.0mm) 6363st
5.50” x 5.24” (139.6mm x 133.0mm) 6565st
5.75” x 5.47” (146.0mm x 139.0mm) 6779st
6.00” x 5.71” (152.4mm x 145.0mm) 6965st
6.25” x 5.95” (158.8mm x 151.2mm) 7185st
6.50” x 6.19” (165.0mm x 157.2mm) 7378st
6.75” x 6.43” (171.4mm x 163.2mm) 7563st
7.00” x 6.66” (177.8mm x 169.2mm) 7732st
7.24” x 6.91” (184.0mm x 175.4mm) 7923st
7.50” x 7.14” (190.4mm x 181.4mm) 8110st
7.75” x 7.38” (196.8mm x 187.4mm0 8296st
8.00” x 7.61” (203.2mm x 193.4mm) 8450st
The following 8 formats are included in the file you will receive:
* DST – (Tajima)
* EXP – (Melco)
* HUS – (Husqvarna,Viking)
* JEF – (Janome,Elna,Kenmore)
* PES – (Brother,Deco,Babylock)
* SEW – (Janome,Elna,Kenmore)
*VP3 – (Husqvarna,Viking)
*VIP
Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.
*************************************************************************************
You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only – not a finished item.
************************************************************************************
For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.
Vendor Information
- Store Name: AmigoArt
- Vendor: AmigoArt
- No ratings found yet!
Check with your seller on his store page or in the product description for the rules for returning and canceling an order.
Product Enquiry
You may also like…
2.99 €~ 3.23 $
Reviews
There are no reviews yet.