Banner in the Hoop

This design comes with 25 sizes (W):

3,91” X 3.39” (99.2mm X 86.2 mm) 5902 st

4.24” X 3.69” (107.8mm X 93.7mm) 6390 st

4.50” X 3.91 (114.2mm X 99.2mm) 6784 st

4.75” X 4.13” (120.7mm X 104.8mm) 7136 st

5.00” X 4.34” (127.0mm X 110.2mm) 7498 st

5.25” X 4.56” (133.4mm X 115.8mm) 7894 st

5.50” X 4.77” (139.6mm X 121.2mm) 8266 st

5.76” X 4.99” (146.2mm X 126.8mm) 8641 st

5.98” X 5.19” (152.0mm X 131.8mm) 8932 st

6.25” X 5.43” (158.7mm X 137.8mm) 9351 st

6.50” X 5.64” (165.0mm X 143.2mm) 9733 st

6.75” X 5.86” (171.4mm X 148.8mm) 10113 st

6.98” X 6.06” (177.4mm X 153.8mm) 10421 st

7.25” X 6.29” (184.1mm X 159.8mm) 10809 st

7.48” X 6.49” (190.0mm X 164.8mm) 11163 st

7.73” X 6.71” (196.4mm X 170.4mm) 11542 st

7.98” X 6.91” (202.6mm X 175.6mm) 11896 st

8.25” X 7.16” (209.5mm X 181.8mm) 12330 st

8.49” X 7.36” (215.6mm X 187.0mm) 12641 st

8.74” X 7.58” (222.0mm X 192.6mm) 13036 st

8.98” X 7.80” (228.2mm X 198.0mm) 13394 st

9.25” X 8.02” (235.0mm X 203.8mm) 13783 st

9.50” X 8.24” (241.2mm X 209.2mm) 14150 st

9.75” X 8.45” (247.6mm X 214.6mm) 14511 st

9.98” X 8.66” (253.6mm X 220.0mm) 14888 st

The following 8 formats are included in the file you will receive:

* DST – (Tajima)

* EXP – (Melco)

* HUS – (Husqvarna,Viking)

* JEF – (Janome,Elna,Kenmore)

* PES – (Brother,Deco,Babylock)

* SEW – (Janome,Elna,Kenmore)

* VP3 – (Pfaff. Husqvarna,Viking)

* XXX – (Compucon, Singer)

Please note this is NOT a patch or a physical item. This is an embroidery design. You will need an embroidery machine to stitch these designs out.

**************************************************************************************************

You MUST have an embroidery machine and the software needed to transfer it from your computer to the machine to use this file. This listing is for the machine file only – not a finished item. ******************************************************************************************

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as Tshirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.